To activate the statistical options select the "Stats" TAB window and the statistical menu will appear as shown below. Stats mode is activated by selecting the "On/Off" checkbox in the top left area of the "Stats" TAB window. Note when activated the statistical data output will remain on for all grid types except for the Darksky output and will automatically change when any of the other parameters such as fixture position change.

The "Shape On" check box allows the user to turn the orange box outlining the statistical area on or off.

The user sets the length and width of the statistical area using the "Length" and "Width" value inputs respectively. The location of the statistical area in the grid is controlled by the "<-L->" and "<-W->" control buttons which allow the user to position the center of the statistical area. In the "Ground-Wall" grid example above, the length is centered at 0ft on the X axis and extends +/- 10ft from the center. The width is centered at 5ft on the Y axis and extends +/- 5ft from the center. The controls allow the user to position the statistical area anywhere on either the "Ground-Wall" or "Area" grids.

The "Wall" check box allows the user to switch the statistical area from the wall to the ground in the "Ground-Wall" grid as shown below: