| 3dOP Pro comes with six user definable light levels. The light levels are controlled in the right middle section of the display. The light levels can be displayed in either footcandles or lx. Each of the six light levels are activated by selecting the checkbox to the left of the light level. The level is changed by depressing the mouse when the insert pointer appears over the value box and moving it left or right to decrease or increase the value respectively.
In the display above the 1fc, 2fc, 5fc, 10fc and 15fc light level are displayed. Note the displayed isoline type can be changed from "Lines" (displayed in screen shot above) to "Points" or "Points Fill" in the "Display" TAB. Also Note: Vertical footcandles/lx are displayed on the wall grid and horizontal footcandles/lux are displayed on the ground and area grids. |
